Aircraft Maintenance Engineer or Gas Turbine Maintenance Technician - Riyadh
I am looking for a post as Aircraft Maintenance Engineer or Gas Turbine Maintenance Technician
I have extensive experience in aircraft Maintenance Engineer in Canada, USA and the Middle East.
Education and Qualifications:
Aircraft Maintenance Engineer (AME), License No. M 754161- ICAO Type II,
Transport Canada.
Aircraft Maintenance Engineer (AME), License No. 0560
Civil Aviation Authority, Sudan.
A&P License No. 2378783, FAA, USA
General Authority of Civil Aviation of Saudi Arabia- (GACA) license M-4356,
Kingdom of Saudi Arabia.
Diploma in Science of Airframe and Power Plant, Texas, USA.
Gas Turbine Engine Training. Pakistan International Airlines-Karachi.
Airworthiness Release A300-600 MALAC –K02S Saudi Arabia Airlines.
Airworthiness Release Dash 8-100/200/300 and B1900 ACA-080(AMO368-91) Air Georgian.
Port Sudan Higher Technical School-Automobile (Gas/Diesel) Eng.
Personal Attributes and Skills
Excellent verbal and written communications skills, coupled with strong work ethics and a team work attitude. Very attentive to details and very adaptive to fast paced environments. In addition, I am very well versed in the use of computers and various productivity packages.
Extensive experience in supervision and management of workshop floor and keeping up to date Technical Records
Extensive experience in preparing purchase /Repair orders and dealing with suppliers and external repair shops.
Strong mechanical aptitude with excellent communication and problem solving skills.
Experience in Cross-utilization & preventive maintenance for GPU, Diesel tuck, Pneumatic Start Carts, Light Carts, Conveyers Belt, and various non-powered equipment.
Work Experience
2015 Premier Aviation Overhaul Centre Inc-Windsor
AME –Contractor. Work on B737-700 Harvey Base maintenance –check C.
2011-2014 Air Canada Express- Air Georgian-Calgary
As AME-Crew chief I carried out line/Base maintenance duties on Dash 8-100/200/300.CRJ100/200 and B1900 PT6-65B and -67D Engine. My duties included:
Reporting to Base Maintenance and Planning Manger on issues affecting the serviceability of Aircraft.
Overseeing and planning the work requirements necessary for the completion of work packages and Release Aircraft for return to service.
Completing and certifying log books and work sheets for work accomplished.
Reviewing task/snags/Deferred items are properly cleared by Authorized maintenance personnel.
Ensuring that safety policies and procedures are followed.
Co-coordinating parts requirements with store Supervisor.
Providing instructional support to employees as required for their development.
Attended several training courses as directed by the company.
Liaising with flight crews with respect to serviceability of Aircraft. Troubleshooting (MCC) via T3 Dispatcher on duties.
Performing corrective action on A/C systems, engines, and other related Aircraft systems.
Defect rectification, Components replacement/ Engine servicing according to AMM Manuals.
Ensuring aircrafts are maintained in accordance AMM, Transport Canada Regulations.
Performing duties in accordance with established policies and procedures while giving primary consideration to personal safety, the safety of co-workers and customers.
Other related duties as assigned or dictated by the daily needs.
2010-2010 Avianor Group Inc.-Mirabel, Quebec
As independent AME contractor I carried out Base maintenance duties on A320-B737-200-B767-300. My roles included:
Defect rectification, Components replacement/ Engine servicing/ working with blueprints, schematics according to AMM Manuals.
Ensuring aircrafts are maintained in accordance with company and Transport Canada
Regulations.
Other related duties as assigned or dictated by the daily needs.
2007-2009 Central Mountain Air, Calgary, Canada
As Aircraft Maintenance Engineer (AME) my duties included:
Line and base maintenance duties on Beech 1900 and Dornier 328; based on maintenance schedules and rectification of defects as needed.
Ensuring the completion of tasks according to company and to Transport Canada regulations.
2005-2005 GoderichAircraGoderich Inc. Huron Park, Canada
Under contract to perform overhaul maintenance/refinishing and repair on Dash 8.
2000-2003 Spar Aerospace Ltd., Edmonton, Canada
Under contract to perform major overhaul maintenance and repair, checks C&“D on C 0B727-200.
1989 – 1996 Saudi Arabia Airlines, Khartoum, Sudan
(Airworthiness Release K02S.)
As a certified Lead Mechanic-T3 (A&P) I was fully involved in Airframe and Power Plant line maintenance, defect rectification and transit checks on the A300-600 on the JT9D-7R4 and CF6-80 C2A8 engines and ensured the completion and certification. Log books.
Professional Training
2015 -Premier Aviation Training-Windsor
Safety Management Training-SMS.
Maintenance Policy Manual -MPM Training.
Technical Writing Training.
PAW101 Training.
AC 120-97/94 Familiarization.
2014 -Air Georgian-Air Canada Express-Calgary
Aviation security Training
Canadian Aviation regulation.
Logbook/Minimum Equipment’s list& independent checks requirements refreshment Training.
2013- Flight Line Training Service-Calgary
DHC Dash 8 100/200/300 Type rating Training Course 104 Level III,
PW121/123 Eng. Transport Canada (TC-2010-05-4112) .EASA parts 147
Approved Course.
2012- Air Georgian Limited-Calgary
Human Factor Course
Engine Run Emergency procedure Training (Simulator)
2011- Airworthiness Release ACA Training
Log Book Familiarization /MEL/RII (Required Inspection Items).
Engine Run-up and Taxi& Bars coupe inspection
Air Row Maintenance inventory Manager Training
2008- Central Mountain Air, Calgary, Canada
328-100 Dornier Type Rating Course –Line Base - Mechanical/Electrical/Avionics
Pratt & Whitney 119 Engine, Transport Canada Approval No. 2006-12-1074-1
2004 - Royal Jordanian Airlines Training Centre
A320 Type Rating Course - Line and Base - Mechanical/Electrical/Avionic -
Level III
CFM56-5A & V2500 Engines
1989-1995 Saudi Arabia Airlines Training Centre, Saudi Arabia and Egypt
1995- Introduction to Aircraft Fluid Lines Course
1994- A300-600 Recurrent A&P
1992- Airworthiness Release A300-600
1991- PCA Airman Certification Training
1989- Required Inspection Items Program:
Log Book Familiarization
TP&P Familiarization (System Aircraft Maintenance)
Refueling General Practice A320 /A300 /B747 / 767 /L1011
A300-600 Recurrent A&P
1990- Gulf Air Training Center, Bahrain
B767-300 Transit/refueling/wheel & break change course.
A/C Experience:
NG-B737-700
B767
DO328
B1900
A320
A300-600
Dash -8 100/200/300
Licenses:
CAA.
FAA.
TC.
GACA
REFERENCES:
Available upon request